diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index 809b865..f99b5f9 100644
--- a/drivers/mmc/arm_pl180_mmci.c
+++ b/drivers/mmc/arm_pl180_mmci.c
@@ -443,15 +443,6 @@
 			    SDI_CLKCR_HWFC_EN;
 	host->clock_in = clk_get_rate(&clk);
 
-	periphid = dev_read_u32_default(dev, "arm,primecell-periphid", 0);
-	switch (periphid) {
-	case STM32_MMCI_ID: /* stm32 variant */
-		host->version2 = false;
-		break;
-	default:
-		host->version2 = true;
-	}
-
 	cfg->name = dev->name;
 	cfg->voltages = VOLTAGE_WINDOW_SD;
 	cfg->host_caps = 0;
@@ -459,6 +450,23 @@
 	cfg->f_max = MMC_CLOCK_MAX;
 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 
+	periphid = dev_read_u32_default(dev, "arm,primecell-periphid", 0);
+	switch (periphid) {
+	case STM32_MMCI_ID: /* stm32 variant */
+		host->version2 = false;
+		break;
+	case UX500V2_MMCI_ID:
+		host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+		host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | SDI_CLKCR_CLKEN |
+				    SDI_CLKCR_HWFC_EN;
+		cfg->voltages = VOLTAGE_WINDOW_MMC;
+		cfg->f_min = host->clock_in / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
+		host->version2 = true;
+		break;
+	default:
+		host->version2 = true;
+	}
+
 	gpio_request_by_name(dev, "cd-gpios", 0, &host->cd_gpio, GPIOD_IS_IN);
 
 	ret = mmc_of_parse(dev, cfg);
diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h
index 61ee96a..15c29be 100644
--- a/drivers/mmc/arm_pl180_mmci.h
+++ b/drivers/mmc/arm_pl180_mmci.h
@@ -142,6 +142,7 @@
 #define SDI_FIFO_BURST_SIZE	8
 
 #define STM32_MMCI_ID		0x00880180
+#define UX500V2_MMCI_ID		0x10480180
 
 struct sdi_registers {
 	u32 power;		/* 0x00*/